Parrot Serial Cable Ck3100 Installation
The mute cable is fitted with black ISO connectors and a 'Line out' output.
To install the car radio with the 'Line in' inputs: Preferably use this type of connection with the brown and green wires and the yellow 'mute' wire connected to the back of your car radio.
Mar 01, 2018 This is both an intro to KRAM Telecom A/S and we show a full Parrot carkit installation using the KRAM cable products, all with plug-and-play functionality.
To install the car radio with the ISO connectors: Disconnect the audio and power cable bundles from the car radio, then connect the female connectors of the mute cable and the power cable to the car radio.
Connect the audio and power cable bundles from the vehicle to the male connectors. If the car radio is fitted with a Mute in, connect the yellow wire from the mute cable to one of the 'Mute In' inputs (1, 2 or 3).
For car radios without ISO connectors: You must get an ISO adapter cable.
How do I fit the power cable?
The power cable's red wire should be connected to the constant 12V, the orange wire to the ignition 12V, and the black wire to the ground.
Check the electrical wiring diagram of the ISO power cable bundle for the car radio.
On some vehicles, the positions of the red and orange wires need to be swapped round.
This can easily be done by swapping the two fuse holders.
Do not connect the orange wire to the constant 12V, or you will risk running down the vehicle's battery.
Upgrade procedure for the
Parrot CK3100, CK3300, CK3500
This document will help you in order to upgrade your
You will find hereunder two different possibilities to upgrade the Parrot CK3100 via Bluetooth.
Software upgrades remove paired phones, synchronized contacts and voice tags.
1 Downloading the upgrade files ...................................................................................... | 1 | |
2 Upgrading the Parrot CK3100 ....................................................................................... | 3 | |
2.1 By serial cable ........................................................................................................... | 3 | |
2.2 By Bluetooth (Method A) ........................................................................................... | 5 | |
2.2.1 Using stack Toshiba ......................................................................................... | 5 | |
2.2.2 Using stack Broadcom and Microsoft................................................................ | 9 | |
2.3 By Bluetooth (Method B) ............................................................................................. | 12 | |
1 Downloading the upgrade files | ||
Before you begin: | Download and install the Parrot Software Update Tool | |
program available on our web site www.parrot.com then | ||
choose SUPPORT and DOWNLOAD. | ||
1.Start the Parrot Software Update Toolprogram.
►The following dialog box is displayed.
2. Click Next.
1
► The following dialog box is displayed.
3.Select Car kits and clickNext.
►The following dialog box is displayed.
4.Select the Parrot CK3100 in the list and clickNext.
►The following dialog box is displayed.
5.Click on Download Latest version.
►The Download Software Update dialog box is displayed.
2
6.Select your language.
7.Click on Download Now and wait until the end of the download.
► The downloaded files will be stored in C:Program Files Parrot Software Update ToolInternet Files.
2 Upgrading the Parrot CK3100
There are three methods to upgrade your Parrot CK3100: one by serial cable (§2.1) and two byBluetooth (§2.2 and 2.3).
2.1 By serial cable
Before you begin: | ∙ Download the upgrade you wish to install. |
∙Connect your computer to your carkit via the serial cable.
∙Keep the Parrot CK3100 off.
1.Start the Parrot Software Update Tooland click Next.
2.Choose the Parrot CK3100 and clickNext.
3.Get the previously downloaded files by clicking on Browse and clickNext.
4.Select Serial connectionand click Next.
3
5. Select the COM port on which you have connected the serial cable and click Next.
6.When the Parrot Software Update Tool reaches the “XPRAM downloading” step, plug in the car kit’s power supply.
7.Wait until the end of the upgrade process and click on Finish.
►You can now disconnect your car kit from the computer.
►Your Parrot CK3100 is now
4
Wait for the automatic reboot of the kit.
Do not stop the power source!
This operation can take few minutes.
2.2By Bluetooth (Method A)
2.2.1Using the Toshiba stack
Before you begin: | ∙ Download the upgrade you wish to install. |
∙Make sure that your Bluetooth device is correctly installed on your computer (refer to its user guide for additional information).
1.Switch on your kit and activate the Software update option that you can find in theSettings
>Advanced Settings menu.
2.Launch a Bluetooth devices search with the software provided with your Bluetooth dongle or with the Windows Bluetooth manager. To do so :
a.Right click on the Bluetooth icon on the toolbar.
b.Select Add New Connection.
►The following window is displayed.
5
c.Select Custom Mode and clickNext. The devices available are displayed
3.Select your Parrot CK3100 device to start the service discovery.
►The following window is displayed.
4.Enter the Bluetooth PIN code : «1234 » and clickOK.
►The Bluetooth services supported by the Parrot CK3100 are now listed.
5. Select UPDATE and click Next.
6
► An outgoing COM Port is provided by the Bluetooth software during the connection. In our example the outgoing COM Port is number 40.
Write this number down, it will be required in the Parrot Software Update Tool. However depending on the specificity of your Bluetooth interface it might be slightly different (refer to your Bluetooth equipment user manual for further explanations).
6.Start Parrot Software Update Tooland click Next.
7.Select the Parrot CK3100 and clickNext.
8.Get the previously downloaded files by clicking on Browse and clickNext.
9.Select Bluetooth virtual serial connexionand click Next.
10. Select the right COM port, which has been previously assigned (COM40 in our example) and clickNext.
7
11. Wait while the Parrot Software Update Tool is passing the different upgrade steps and
Finish.
Wait for the automatic reboot of the kit. Do not stop the power source!
This operation can take few minutes.
► Your Parrot CK3100 is now up to date.
8
2.2.1 Using Broadcom and Microsoft stacks
Parrot Serial Cable Ck3100 Installation Guide
Before you begin: | ∙ Download the upgrade you wish to install. |
∙Make sure that your Bluetooth device is correctly installed on your computer (refer to its user guide for additional information).
1.Switch on your kit and activate the Software update option that you can find in theSettings
>Advanced Settings menu.
2.Launch a Bluetooth devices search with the software provided with your Bluetooth dongle or with the Windows Bluetooth manager. To do so :
a.Right click on the Bluetooth icon on the toolbar.
b.Select Add a Bluetooth Device.
►The following window is displayed.
c.Select My device is set up and ready to be foundand click Next.
► The devices available are displayed.
3.Select your Parrot CK3100 and click Next.
►The following window is displayed.
9
4.Select Let me choose my own passkey then enter the BluetoothPIN code : «1234 » and clickNext.
5.Wait until the connection is established then click Finish.
6.An outgoing COM Port is provided by the Bluetooth software during the connection. In our example the outgoing COM Port is number 46.
Write this number down, it will be required in the Parrot Software Update Tool. However depending on the specificity of your Bluetooth interface it might be slightly different (refer to your Bluetooth equipment user manual for further explanations).
7.Start Parrot Software Update Tooland click Next.
8.Select the Parrot CK3100 and clickNext.
9.Get the previously downloaded files by clicking on Browse and clickNext.
Parrot Serial Cable Pinout
10.Select Bluetooth virtual serial connexionand click Next.
10